Build Body Cart

 My goal here is to build a cart to put the body on so I can more easily perform the work on it and also to be able to move it into the driveway for grinding and sanding so not so much dust gets into the garage, and also to be able to roll the frame out from underneath to be able to work on it if I want.

The way this works it I take the cross members off and place the sides (With the wheels) on each side of the car.  Then use a lift to raise the body off the frame. The tall end goes toward the rear and the short end to the front.  One the body is high enough the cross member in the rear is installed across the rear wheel wells and secured.  The the car is set down on that cross member and I move the lift to the front of the car and raise it high enough to install the front cross member and set the car down on it.

Thats all there is to it. Then I can roll the body out or the frame can roll out by going right under the cart.

Going on vacation now.  No more work for a couple weeks.