One Step Forward, 5 Steps Back

 Ugh...I have a problem with the epoxy primer where it was painted over bare metal.  Thats the main body, drivers fender, two doors, trunk lid, and a few other spots.  While I was sanding it to get it ready for the high build primer I noticed a few small pieces chipping off.  I got my air hose and blew the chips away and found that the flippin paint just blows off with the air hose!  This is more that frustrating.  I thought I was ready for the next step of the high build primer and now I have to remove all that primer I have on and go back to bare metal.  I have a ticket open with the paint people to see what they think went wrong mut I don't have much hope for that.  I did paint when the temp was below there spec but the instructions said it would just take longer to dry, not that it wouldn't stick so I don't think thats it.  For some reason it seems to have stuck pretty good to the roof.  Didn't do anything different there.  Who knows.

Video of my frustration