Console Stuff

 I need some input on this please.  Trying to get the console planned and can't find the plan we originally had if we had one but look at the pics and tell me if this is ok before I start cutting.

Got the console cut to fit in the car.

It looks like the lighting is not good enough for you the read whats on the cardboard cutouts so I will describe:

    The two circles on the bottom are the cup holders

    Next up is the location where the horseshoe shifter will be.  Cannot be changed

    Above that are 4 cardboards.  The two bigger ones on the outside are phone holder cups and the center         two are the seat heater control and the door lock button

    Lastly is the radio

This pic shows a side view and the little round circle is a USB port that provides access to the engine computer only

On this pic right in front of the cup holders and behind the shifter is a circle with a type C charger port and a USB port for the radio

I need to know if you want to move this around at all as I'm gettin ready to cut these out.  Also on the previous post I was hoping you would get back to me on if we are painting the console black or the blue color of the car.  I think I found that you are not looking at this blog too much...thankfully I'm almost done.